A bifacial solar panel generates electricity from both sides. The front faces the sun and does most of the work, like any solar panel. The back can also collect light, picking up sunlight reflected off the roof, the ground, or nearby surfaces. That two-sided design is a big part of where panel technology has gone, and it's what we install on homes across Marin, Sonoma, and Napa.
How a bifacial panel works
A standard solar panel has cells facing the sun on the front and a solid, opaque backing behind them. A bifacial panel is built so light can reach its cells from behind, too. Many bifacial panels use glass on both the front and the back, sometimes called a dual-glass or glass-glass design, while others use a clear backsheet. Either way, the back of the panel is open to light.
When sunlight hits the front, the cells turn it into electricity as usual. At the same time, some light bounces off whatever is beneath and around the panel and reaches the back of the cells. That reflected light adds to the power the panel produces.
The light reaching the back comes from a few places:
- Reflected sunlight off the roof, the ground, or nearby surfaces.
- Diffuse light scattered by the sky, clouds, and fog, which arrives from many directions at once.
- Light from the surroundings, such as a light-colored wall or a pale gravel bed.
Where the extra light comes from
How much light reaches the back of a bifacial panel depends on the setting. Two things shape it most.
What's underneath. Lighter surfaces reflect more light than darker ones. A pale roof membrane, light gravel, or dry summer grass reflects more back toward the panels than a dark surface does. The share of light a surface reflects is called its albedo, and you may see that word on technical documents.
How high and how open the panel is. The more space and open air between the panel and the surface below it, the more reflected light can reach the back. Ground-mounted arrays and panels on raised, tilted racking leave plenty of open space, so reflected light can get in from many angles.
Because every site is different, so is the extra production from the back of the panel. Part of our design work is looking at where the panels will go and what's around them.
Bifacial panels on ground mounts
Ground-mounted arrays are a natural setting for bifacial panels. The panels sit on their racking with open space beneath them, and the ground reflects light onto the back side all day. For properties with room for a ground-mounted array, including many rural and agricultural properties in Sonoma and Napa, bifacial panels make good use of the open space around them.
Bifacial panels on flat roofs and raised racking
On a flat roof, panels sit on tilted racking above the roof surface, which leaves room for reflected light to reach their backs. A light-colored roof surface adds to that. The same idea applies anywhere panels are raised and tilted with open space behind them.
Bifacial panels on pitched roofs
On a typical pitched roof, panels sit on rails a few inches above the roof surface, following its slope. The front of the panel does the main work, and it produces power just as you'd expect from a quality solar panel. Bifacial panels also bring the build qualities of their design to the roof, and many dual-glass panels are known for their sturdy construction and long warranties. Whatever kind of roof you have, from composition shingle to metal, the panels are matched to your home during the design.
Built to last
Bifacial technology goes hand in hand with durable panel construction. Glass on both sides protects the cells from the front and the back, and quality bifacial panels from established manufacturers carry long product warranties. Like other quality panels, they're designed to produce power for decades. Our post on how long solar panels last covers what that looks like over the years.
A clean look
Many bifacial panels have a crisp, modern appearance. Their framing and glass give an array a tidy, finished look, and from the street they look much like any other quality solar panel. On a ground mount or open-backed racking, the light passing between the cells gives the array a lighter, airy feel.
Where bifacial fits in panel technology
Solar panels keep getting better, and bifacial design is one way manufacturers have found to capture more of the light that reaches an array. It builds on the same silicon cells used across the industry, which we explain in our post on monocrystalline and polycrystalline solar panels. The right panel for any home depends on the roof, the property, and the homeowner's goals, and our designers look at all of it together.
Pairing bifacial panels with a battery
Every system we design includes a home battery. Your panels produce the most power during the day, often more than your home uses at that moment. The battery stores that extra power so you can use it in the evening, when electricity costs the most.
A Savings Battery stores and discharges every day to help lower your electricity bill. A Backup Battery does that and also keeps your chosen circuits running during an outage. We size the battery and the panels together so they work as one system.
How we choose panels for your home
We install bifacial panels from established manufacturers, and we match the layout, racking, and battery to your roof or property, your usage, and how you want your home to look. During the design, we walk you through the equipment and explain what it will do for your home in plain terms.
We're 100% employee-owned, we've worked across the North Bay since 1984, and we've installed more than 9,000 systems. We're licensed as a General Contractor (B) and Electrical Contractor (C-10), and we were one of the first companies in California to earn the state's C-46 solar license.
Curious what bifacial panels and a battery could do for your home? Contact SolarCraft or call Sonoma/Napa 707.778.0568 or Marin 415.382.7717.